Prato, IT
Details
- Dimensions
- 13.39ʺW × 13.39ʺD × 9.06ʺH
- Period
- 1980s
- Country of Origin
- Italy
- Item Type
- Vintage, Antique or Pre-owned
Shop Sustainably with Chairish
- Condition
- Good Condition, Original Condition Unaltered, Some Imperfections
- Color
- Condition Notes
- Excellent — This vintage piece is in near original condition. It may show minimal traces of use and/or have slight … moreExcellent — This vintage piece is in near original condition. It may show minimal traces of use and/or have slight restorations\. The item is in excellent condition. All items in the entire collection have never been used; it was part of the exhibition. less
- Description
-
Before describing the object under consideration we must make an important clarification, the artifact, one of many that we will …
more
Before describing the object under consideration we must make an important clarification, the artifact, one of many that we will publish over time, is part of the collection museum of a historic Florentine crystal grinder that unfortunately closed recently. It is the Marcello Galgani & Son company, whose completely manual and artisanal work has not withstood the disproportionate advance of mass-produced mechanical processes! Marcello Galgani began his craft as a grinder and restorer in 1960; as the years went by, Marcello mastered and became familiar with particular techniques and shapes, resulting in the production of objects that manage to retain the freshness of grinding and engraving, the warmth and softness of light, and the inimitable flavor of unique artifacts. After several years, his son Lorenzo, who grew up among crystals, also entered the business and immediately became passionate about this ancient craft with skill and ability. Stimulated by the aesthetic sense of the past, father and son, set up a workshop in which the shapes they researched and created themselves are mouth-blown by traditional Tuscan glassmakers in Empoli, then ground and engraved using ancient sixteenth-century techniques, with motifs born of the Galgani's inexhaustible imagination or culturally inspired by designs of objects seen and studied in Florentine museums (Uffizi, Galleria Palatina, Museo degli Argenti, etc.). Marcello and Lorenzo Galgani were also Masters in the difficult art of restoration, bringing rare and precious objects back to life. As mentioned the company recently closed and disposed of all its last production, only Marcello's old private museum collection remained, which includes unique and special objects created over time, a collection that the craftsman made available to us for a planned sale. All of the objects were made entirely by hand with old grinding wheels, but there were mainly two tools that allowed the creation of masterpieces: the right hand and the left hand of the master craftsman. Ancient glassmaking techniques were used for all the ground and engraved products: first the object was ground with an emery wheel fed continuously by a jet of abrasive sand and water, then re-polished with a very fine-grained sandstone wheel also fed with water; the engravings were done freehand using as many as 10-15 small stone wheels for each design (flowers, branches, animals, etc. ); then the object was polished and shined; we must make, at this point, an important clarification on these last two operations: towards the end of the 1960s acid crystal polishing was devised, the object was immersed and rotated in a solution of sulfuric acid, fluoridic acid and water and in a short time all the defects left by the previous processes were eliminated, it was a fast, industrial operation that allowed to lower costs considerably, with discrete but not excellent results. But for Galgani's products polishing is done with a cork bark wheel wet with water and pumice to make the surfaces more transparent, and finally, polishing was achieved with a felt wheel wet with a paste of water, iron oxide, and cerium oxide. This series of processes takes an average of two days of work( sometimes much longer) for each object, each engraving or grinding is the result of the creative inventiveness of the two craftsmen, inventiveness that transforms crystal into a material reality of the highest aesthetic value and inestimable value. All objects in the collection have never been used; they were part of the exhibition. Original crystal table centerpiece; the simple smooth shape of the plate and the base that supports it has a unique elegance and refinement; it can be used as a sophisticated fruit bowl or as an elegant table centerpiece; the object was made and signed by the Master was created in Marcello Galgani's workshop in 1984, and made with the techniques we have explained in the description, with particular accuracy and expertise the perfect polishing was done. The object is in excellent condition. There are 6 examples of this piece. Measures diameter cm.34, height cm.23. This piece has an attribution mark,
I am sure that it is completely authentic and take full responsibility for any authenticity
issues arising from misattribution less
Featured Promoted Listings
Related Collections
- Copeland Decorative Bowls
- Raymor Pottery Decorative Bowls
- Brass Chinese Decorative Bowls
- Karl Hagenauer Decorative Bowls
- Beaux-Arts Decorative Bowls
- Quartz Decorative Bowls
- Gino Vistosi / Murano Decorative Bowls
- Glass Kosta Boda Decorative Bowls
- Glass Orrefors Decorative Bowls
- Classical Roman Decorative Bowls
- Roycroft Decorative Bowls
- R and Y Augousti Decorative Bowls
- Shagreen Decorative Bowls
- Versace Decorative Bowls
- Silk Decorative Bowls
- Mission Decorative Bowls
- Kifu Paris Decorative Bowls
- Mason's Ironstone Decorative Bowls
- Angelo Mangiarotti Decorative Bowls
- De Sarreguemines Decorative Bowls
- Godinger Decorative Bowls
- Antique Copper Finish Decorative Bowls
- Beech Decorative Bowls
- A. Murano Decorative Bowls
- VIETRI Decorative Bowls